Solomon's Forum Posts

  • Asmodean Thanks!

    Well I checked the temperature and fans before using diagnostic tools from my Windows desktop and I did not see anything suspicious after comparing my temperatures to those of folks on the internet.

    But now that all is good its time to celebrate, with some fresh carrot juice and a loaf of freshly baked brown bread with chia seeds. Gutten apetit!

  • Zebbi

    Ive managed to resolve the problem, read

    Perphaps it can help you as well.

  • IT HAS BEEN SOLVED!

    1) After a new fresh format I have decided to open my computer case, take out my graphics card and my hard drive, detach it and clean the hell out of both of them using a air spray can for about 20 minutes with pauses. Then I took a brush and brushed all the dust the heck out of it.

    Then I firmly connected both into their slots on the motherboard.

    2)Next I downloaded Nvidia Inspector from guru3d.com, ran it and changed vertical tear control to standard.

    3)Last but not least Ive reverted back to AERO theme instread of classic, because from what I read only AERO supports vsync for tearing.

    Sorry for all the hassle everyone especially Asmodean, and thanks for your time

    Hopefully now I can return to making games without any other problematic interferences!

  • After updating Construct 2 to version 217 and updating NWjs to the newest build all is well and as should be and the problem is no more.

  • Your problems get really strange I had never tearing with construct either in browser or in NW.js. Can you set all settings back in your graphic card driver to default an try again?

    Is it possible that you try another graphic card, maybe it's really a hardware problem or you could try at first another monitor-cable that's very unlikely that's the problem, but I'm really out of ideas.

    I tried 2 different monitors with 2 different cables. No difference there.

    I have set the graphic card settings to default a couple of times inbetween dialing up/down different settings.

    Different graphics cards - unfortunately I have no such possibility, but you are right, that would simplify a lot and help troubleshoot if the problem is with the graphics card itself.

    It would be nice to find another person with a Geforce GTX 960 to verify that its only me that is having such problems with construct 2.

    But it seems that its not only me that is having such issues:

    EDIT: Time to format my computer again, Im getting wierd artifacts in the browser with Firefox, I think the Windows live updates $(&@$ my computer up. But that cant be the issue I dont think, since I had problems before the updates, and I tried to remedy them by installing the updates. I hope its not a case of my graphics card and the Windows version, because Im not moving onto Windows 8 or 10.

    See you after reformat.

    PS. Do you think that it could be that my hard drive is too slow?

  • Same issue here, tearing about a quarter way down from the top of the screen, like a fold.

    What graphics card have you got? Have you tried turning on Vsync? Do you have the tearing in other games too? Other 2d games?

  • I have exported my game to NWjs and it is playing differenly than in my Chrome browser...

    The values and speeds are different once in game preview (altough they are the same for both in the capx file - it is the same file from which I exported both), how is this possible?

  • Try Construct 3

    Develop games in your browser. Powerful, performant & highly capable.

    Try Now Construct 3 users don't see these ads

  • I am having some issues which have been posted here:

    Now I do not expect anyone to read such a long thread, I would like to ask briefly if anyone had problems with vsync or tearing or stutter problems in games created with Construct 2. If yes how did you overcome them?

    I am trying different options, turning on Vsync and Gsync (graphics cards = Nvidia Geforce GTX 960) and trying to limit FPS with no luck to be honest.

    I cant seem to be able to get rid of the problem.

    Ps. I have a 60Hz refresh rate monitor.

  • Ok time for an update.

    I bought Construct 2 personal license, exported my game using NWjs, and the stutters are a little bit less noticable but they are still there. Additionally I am getting tearing now. I am changing the vsync and gsync values in my graphics card but dont seem to get any results. Do these work for html5 or NWjs files in terms of fixing tearing?

  • It seems that browsers (at least chrome, don't know about FF) are limited to 60FPS or maybe fix at 60FPS. Is it possible that the screen refresh of your graphic card is set to something other than 60FPS? And if you switch the screen resolution you switch the refresh rate too?

    I think you might be on to something.. I can set limit the frame rate for games ànd did so now to 60 FPS, but how to do it for Windows and browser?

    Using the Construct 2 in debug mode (now previewing in Chrome) shows that the FPS is 60, but might that be not so?

    EDIT:

    I think Ive found some settings using an external Nvidia app, still Im having trouble. Getting into a lower res helps a lot, I need to do some reading on these issues regrding vsync tearing and FPS.

    Did you have any FPS problems/ tearing? How did you go about fixing them?

  • Hmm interesting. I wonder if it could be a problem with my Power Supply Unit or as I said some piece of hardware. Need to get to the bottom of this, some heavy troubleshooting ahead, even if it means trying to isolate each component piece by piece.

  • Im interested what kind of games have you created and published? What kind of bugs have you got? I plan on buying Construct 2 and would like some more information on the problems you are having with publishing, for future reference and to know what to expect.

  • No internet doesnt help.

    All Windows updates are installed now.

    In safe mode I couldnt make a preview from Construct 2.

    Regarding the game you proposed, I dont feel the lag there, it seems that is affects html5 games. Ill try some other games as well.

    That is the problem, if I want to make games in html5 and Im getting a lag there, well that maybe isnt the way to go. But Im not giving up just yet.

    I have posted on a few techy forums for help, and we will see how it goes.

    Its strange that this issue is resolution dependant like Ive posted before. It may be because of the monitor or graphics cards.. I dont know. But Ive tested on 2 monitors and both of them have the same problem, but both have a refresh rate of 60hz. This happens when I set a max resolution on these monitors. If I go lower the problem disapears on 1 monitor (but I get a blurry desktop), and on the other one is produced less.

    Anyway thanks for your time and help, will update this thread once I find something out.

  • I did as you instructed, pulled up the task manager and set the highest usage of the procesor descending from top, to see if there is something that pops up.

    The 99% at the top is idle (in Polish language).

    I did find something but it is not in sync with the lags I am getting. Firefox is jumping places every now and then, swapping for into second place, but I guess that its because it is using the 1% of processor power and the rest is using 0.

    Do you think that is relevant?

  • LittleStain

    Yes, but on my end once the worst part at the beginning is over, every second I have a stutter...