Sweet. Thanks for the update.

Ok here's what I got: https://www.dropbox.com/s/ado2pc0kbr5wv ... .capx?dl=0

• Removed extraneous layout
• Removed extraneous objects in problematic layout
• MInimized interactivity needed. Platform behavior starts as disabled on start of layout. Press any key to enable Platform behavior. This will cause "Player" object to land on "Hazard" object which will restart layout (once again, disabling Platform behavior). I still require you to press a key just so that there's a "pause" at the beginning to see the effect of the last "death"
• Tested in IE. About 80% of the time the second platform will be highlighted. I can't get it to reproduce 100% yet but honestly I'm pretty surprised I got it to reproduce this often. At first I was seeing it 1% of the time in one the layouts I was building. It was nagging me enough then but I'm thankful I was able to get a layout like this where I can reproduce it very consistently

I hope that this is enough.

Ok. I should be able to do this. Will take a day or two.

Problem Description

A collision is being falsely reported on start of layout when I immediately restart a layout due to a collision

Attach a Capx

Got a SQL error when attaching a capx. Here's a link to my capx: https://www.dropbox.com/s/8wgrs1vw3rko1 ... .capx?dl=0

Description of Capx

This capx gives you control of a "Player" object with Platform behavior. The "Player" can interact with 3 objects that have the "Solid" behavior:

• Normal - Nothing special. Normal solid.
• Hazard - A hazard that will cause the player to "die". As of right now, death simply results in an immediate restart of layout. I assume this is a perfectly reasonable way to handle a quick restart.
• SolidTrigger - This solid will "light up" the first time it's touched. This happens to be an easy way to communicate a collision in this demo. There are two layouts. One that easily communicates the bug when you follow the reproduction steps and one that showcases normal interaction

Steps to Reproduce Bug

Scenario A

• Start with the "BUG - Prelit Platform" layout
• Drop down the right side of the starting platform.
• The player should land on a Hazard directly above the leftmost SolidTrigger (this SolidTrigger may light up)
• The layout will immediately restart

Scenario B

• Start with the "BUG - Prelit Platform" layout
• Run full speed to the right
• The player should land on a Hazard directly above the second SolidTrigger from the left (this SolidTrigger may light up)
• The layout will immediately restart

Observed Result

Scenario A - The second SolidTrigger from the left starts as lit when the layout restarts

Scenario B - The leftmost SolidTrigger starts as lit when the layout restarts

Expected Result

I expect all the SolidTriggers to start as un-lit when a layout restarts.

Affected Browsers

• Chrome: YES (Scenario B)
• FireFox: YES (Scenario B)
• Internet Explorer: YES (Scenario A & B)

Operating System and Service Pack

Windows 8.1

Construct 2 Version ID

r200 64-bit

Hey all. Sorry for the broad question but I can't seem to find a straight answer in my searches. How long is the approval process once you submit a Windows 8 app? Is there still hope to get published by Oct. 26?

Ugh, I uploaded the wrong Capx. My apologies. I'll update with correct capx shortly.

Capx

Demo

Conditions tested on:

Windows 7 Ultimate (latest)

Chrome (latest)

Radeon 7690M

Repro Steps:

Press S (to fall through) until you can't fall through a normal FT platform.

The bug occurs very frequently but I don't know the exact reproduction conditions so it's possible to make it to the bottom w/o seeing the bug.

Press ESC to restart layout in this instance.

Bug:

Given the provided Capx, it is possible to land on a floor yet C2 is saying that the Player is not the on the floor. I believe the action pictured below is the culprit as it doesn't occur when I disable that particular action. As such, I assume that the bug is occurring because the collision polygon disappears for an instant while the animation is changing.

<img src="http://snag.gy/2lzUk.jpg" border="0">

Alright, I updated the following:

Capx: dl.dropbox.com/u/5731948/JustLanded.capx

Web Demo: dl.dropbox.com/u/5731948/JustLanded/index.html

You may have to clear your cache to get the updated web demo (title should say "JustLanded" this time)

Now it has the option to run a simulation. If you press the "1" key it will do 3 jumps and a slam with the right timing to cause the bug. Alternatively, if you press the "2" key it will do 3 jumps with no slam and will not trigger bug. Also, ESC restarts the layout. Previous controls still apply when not in simulation mode.

Maybe I can simulate inputs. Give me a couple hours.

Capx: dl.dropbox.com/u/5731948/JustLanded.capx

Web Demo: dl.dropbox.com/u/5731948/JustLanded/index.html

Video Example: youtu.be/0Zc2Ffkw6Eo

Conditions tested on:

Windows 7 Ultimate (latest)

Chrome (latest)

Radeon 7690M

Bug:

My game has a triple jump and a "ground pound" with the following controls:

A = Left, D = Right, S = Ground pound, Space = Jump (up to 3x)

On occasions where the platform is just in-reach for a triple jump, you can try a triple jump and then ground pound to land on the platform. If you do the pound low enough to the platform it doesn't reset the jump counter. The short video I made shows off better than I can explain.

Capx: dl.dropbox.com/u/5731948/EventsSearch.capx

Bug:

When I first start C2, I can't accurately find variables, using Events Search, that are inside of collapsed groups. If I leave everything expanded, and do a search, it works. Seemingly, it will then be in cache and work again even if I re-collapse the groups.

Repro Steps:

I have the following events in my Capx

<img src="http://snag.gy/lmB80.jpg" border="0" />

When the "Group" group is collapsed and I do a search for "test" as soon as C2 fires up and it doesn't show the "Group" group anymore:

<img src="http://snag.gy/GivZl.jpg" border="0" />

If I expand "Group" and try again I get the results I expect:

<img src="http://snag.gy/50j8n.jpg" border="0" />

Capx: dl.dropbox.com/u/5731948/Bug-SolidPlatform.capx

Demo: dl.dropbox.com/u/5731948/Bug-SolidPlatform/index.html

I've created an ation to set gravity (even to the same value) upon a platformer landing. When platformer lands on a fall-thru everything seems to work fine. When platformer lands on a solid, sometimes it'll get stuck in some landing loop that can go on anywhere between 2 and 20 (or many more) reps.