John Cutter's Forum Posts

  • Your project should work fine in Construct 3. In fact you can probably try it with the free version. (Just click on the Construct 3 link above.)

    That said, if you SAVE your project using Construct 3 you will no longer be able to load it in Construct 2. At least, this is my understanding.

  • [quote:1blze4vj]If this is for C3, why post in the C2 section?

    Yeah, sorry about that. I initially posted in the C2 section because more people seem to read that section. When I realized my problem was specific to C3 I posted again there, then found out it was too late for me to delete this thread. Can you do that for me? Thanks!

  • Update: blackhornet provided the solution to my problem! When I entered the data in the JSON file (using Construct 3 I was able to type values into a table) I was using quotation marks for strings. Apparently, this isn't necessary. When I removed them everything worked correctly.

    In case anyone else runs into this issue in the future I made a quick illustration:

  • [quote:34y3482z]You don't need the quotes in the JSON file. Get rid of all of them, and it works.

    That did the trick! Thank you very much, blackhornet. That was driving me nuts.

    For anyone else who might run into this same issue in the future I made a quick diagram:

  • That sounds amazing, oosyrag! When I get some time I'll check it out!

  • I started this thread in the Construct 2 General Discussion board, but I think the problem may be specific to Construct 3 so I'm recreating it here.

    I was trying to learn about the Dictionary object the other day and I created a simple test:

    1. I started a new project

    2. I added a dictionary object, AJAX, a button, and a text object.

    3. I right clicked on "Files" and picked New --> Dictionary

    4. I made size = 4 and I created four sample keys:

    "Name" = "John"

    "Age" = 56

    "last_played" = 0

    "puzzles_lost" = 0

    Then I created a few events that looked like this:

    To my surprise, clicking the button on my layout did NOT change my text string to "John" as I expected. It changed to "0". When I looked at the debug panel the dictionary appeared to have the correct information, though when I looked at the string for AJAX.LastData it looked like this:

    {
   "c2dictionary": true,
   "data": {
      "\"Name\"": "\"John\"",
      "\"Age\"": 32,
      "\"last_played\"": 0,
      "\"puzzles_lost\"": 0
   }
}[/code:1b28gtnl]

Are the back slashes normal? I didn't edit the JSON data, I just had C3 make it for me...

As a test I added some keys to my dictionary object using "Add Key" and everything worked as intended.

[img="http://i68.tinypic.com/2s1m2rq.jpg"]

I'm stumped. Is this a bug in Construct 3? Or is it, [b][i]once again[/i][/b], something stupid I'm doing wrong? 

Here's my .c3p file:
[url]https://ufile.io/hk7a1[/url]

  • [quote:2dwry3bw]Post a CAPX.

    As I mentioned, I built my dictionary test using Construct 3. (But the file is small enough for people with the FREE version to view.)

    dictionary_test.c3p

    https://ufile.io/hk7a1

    UPDATE:

    I just tried adding keys to my dictionary manually, and that worked as intended. Here's the code:

    So I seem to be having an issue when I use Construct 3 to generate my dictionary file. I'll put up a new post in the Construct 3 area.

  • Try this: forget about the form for now, try to directly print Dictionary.Get("Name") to the console after loading the dictionary.[/code:3d55xobx]

To be honest, I'm not sure how to do that. I need a plugin, right?

As a test I just started completely over with fresh code and tried setting a Global String variable to Dictionary.Get("Name"). I tried triggering this based on a button press (the debugger says the value of the variable was still "O"), then I moved it below the line where the dictionary loads AJAX.LastData. The debugger still says "O".

I'm stumped.

  • Thank you for the reply, Zed!

    Here is the JSON string from Ajax.LastData:

    {
	"c2dictionary": true,
	"data": {
		"\"Name\"": "\"John\"",
		"\"Age\"": 32,
		"\"last_played\"": 0,
		"\"puzzles_lost\"": 0
	}
}[/code:zs15n2r5]

I created the json file within Construct 3. I right clicked on the "Files" button and chose "New" & "Dictionary". Then I just entered some values:

"Name" = "John"
"Age" = 32
"last_played" = 0
"puzzles_lost" = 0

  • I was doing some simple tests with the dictionary object and I immediately ran into a snag. (See image below.) When I click the button on my form the text string changes to "0". What am I doing wrong?

    NOTE: I included a picture of the debugger. The dictionary object has the correct data, I just can't seem to retrieve it using the key value "Name".

  • Before I started working on my Facebook Instant game I played a bunch of them on my laptop. They almost all had the same pixel dimensions: 503x894. So that's the resolution I chose for my game.

    Yesterday I played a couple of games on my iPad and almost all of them filled the screen in both portrait AND when rotated to landscape mode. I've skimmed the Facebook documentation and it looks like I can take advantage of "Fluid Layout" in the settings menu. Am I correct in assuming that this will handle the scaling for me? So I just need to make sure my aspect ratio is correct? Is that right?

  • Try Construct 3

    Develop games in your browser. Powerful, performant & highly capable.

    Try Now Construct 3 users don't see these ads

  • [quote:1odtnfeh]Sprite:DragDrop is dragging -> Sprite: Set position to Touch.X - 32, Touch.Y - 32

    I thought I already tried that, but perhaps I did it wrong. Thanks for the reply!

  • Implementing dragging and dropping manually isn't difficult, but it's always a pain in the butt -- so I was really excited the first time I found the "drag and drop" behavior in Construct. So easy!

    That said, is there any way to do an offset? On mobile, for example, most games will offset the item being dragged so it isn't blocked by the player's finger. Is this possible (without rolling my own D&D code)?

  • [quote:fxfw6m52]What sort of randomness do you need? Do you just a seeded random number or perlin style coherent noise?

    Thanks for getting back to me, Nepeo!

    I don't think I need Perlin noise, I just want to make the random elements of my game deterministic, so all players get the same experience. I've found that this also helps with game testing.

    As I mentioned, my Facebook Instant game uses randomly generated word puzzles. If I could set a random seed then all players would get the same puzzle at each level of the game. (From 1 to infinity!) This is important because I want to have leaderboards and maybe some sort of challenge feature.

  • [quote:2cl6reav]The problem is your json file. Did you edit it manually? The length is set to 13570. It should be 13569.

    If you run with the Console up, you'll see an exception is thrown. That's why the later code is not run - it is crashing.

    Yikes! Yes, I generate the .json file from an Excel spreadsheet. Looks like I need to fix my VBA code. Thanks, blackhornet!

    When you say "run with the console up" do you mean the debug console? I've never noticed any error messages...